Schwerpunkt Nutzung

2018

 

P. Diwisch, C. Glenk, F. Rieg: Optimization of the gas exchange of a split-single two-stroke engine through simulation, calculation and redesign of combustion chamber, intake- and exhaust ports. In: NAFEMS (Hg.): NAFEMS 18 DACH Conference. Berechnung und Simulation: Anwendung, Entwicklung, Trends. Bamberg, 14. - 16.05.2018, S. 184–187.

 

M. Stoppok, A. Jess, R. Freitag, E. Alber: A comparative analysis of household energy consumption in Kenya, Germany and Spain.In: Energy Research & Social Science 40(2018), pp. 127-139. DOI 10.1016/j.erss.2017.12.004, January 2018

 


2017

 

F. Heberle, D. Brüggemann, A. P. Weiß, L. Grundemann: Geothermische Kraftwerke in Deutschland - Individuelle Lösungen durch die geeignete Wahl des Arbeitsmediums. BWK - Das Energie-Fachmagazin 69 (2017) Nr. 6, S. 51-54, Juni 2017

 

F. Heberle, M. Hofer, N. Ürlings, H. Schröder, T. Anderlohr, D. Brüggemann: Techno-economic analysis of a solar thermal retrofit for an air-cooled geothermal Organic Rankine Cycle power plant. In: Renewable Energy, vol. 113, pp. 494-502, doi.org/10.1016/j.renene.2017.06.031, June 2017

 

T. Eller, F. Heberle, D. Brüggemann: Second law analysis of novel working fluid pairs for waste heat recovery by the Kalina cycle. In: Energy, vol. 119, pp. 188-198, doi:10.1016/j.energy.2016.12.081, January 2017

 


2016

 

F. Heberle, T. Eller, D. Brüggemann: Thermoeconomic evaluation of one-and double-stage ORC for geothermal combined heat and power production. In: Proceedings of European Geothermal Congress 2016, Paper-ID T-PO-148, Strasbourg (France), September 2016

 

F. Heberle, C. Schifflechner, D. Brüggemann: Life cycle assessment of Organic Rankine Cycles for geothermal power generation considering low-GWP working fluids. In: Geothermics, vol. 64, pp. 392-400, doi:10.1016/j.geothermics.2016.06.010, July 2016

 

P. Diwisch, C. Dinkel, F. Rieg, B. Alber-Laukant: Design of an innovative natural gas two-stroke engine. In: Marjanović, Dorian ; Pavković, Neven; Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb (Hrsg.): Design 2016: proceedings of the 14th International Design Conference, May, 16-19 2016, Cavtat, Dubrovnik, Croatia - Zagreb: Sveučilišna tiskara, 2016. - S. 811-820.

 

P. Diwisch, D. Billenstein, F. Rieg, B. Alber-Laukant: Entwicklung eines Doppelkolbenmotors: Konzept, Simulation und Prüfstandversuche. In: Stelzer, Ralph; Technische Universität Dresden (Hrsg.): Entwerfen Entwickeln Erleben 2016 : Beiträge zur virtuellen Produktentwicklung und Konstruktionstechnik - Dresden, 2016. - S. 475-485

 


2015

 

A. Jess: Energy demand for global welfare and ecosystem health. Plenary lecture, XX International Conference on Chemical Thermodynamics in Russia (RCCT 2015), Nizhny Novgorod June 22-26, 2015.

 


2014

 

M. Willert-Porada, A. Rosin, A. Schmidt, T. Gerdes, M. Adam: Analysis of microwave heating in a fluidized bed reactor. Microwave Symposium Digest (MTT), 1 – 4, DOI: 10.1109/MWSYM.2014.6848517, June 2014.

 

M. Willert-Porada, H.-S. Park: Microwave assisted ion exchange in silicate glass. Microwave Symposium (IMS), 2014 IEEE MTT-S International, 1 – 4, DOI: 10.1109/MWSYM.2014.6848356, June 2014.

 

O. Ertugrul, H.-S. Park, K. Onel, M. Willert-Porada: Effect of particle size and heating rate in microwave sintering of 316L stainless steel. Powder Technology, vol. 253, 703-709, DOI:10.1016/j.powtec.2013.12.043, February 2014.

 

C. Dinkel, M. Frisch, B. Roith, F. Rieg: Examination of heat transfer mechanisms in nuclear fuel casks by using CFD simulation. In: NAFEMS (Hrsg.): Seminar: Best Practices for Thermal Analyses and Heat Transfer. 10 - 11 November 2014, Wiesbaden, Germany. Bernau am Chiemsee: NAFEMS Deutschland Österreich Schweiz GmbH, S. 135–144, 2014

 

C. Dinkel, B. Roith, M. Frisch, F. Rieg: Berechnung von Transport- und Lagerbehältern für Brennelemente. In: Rieg, F., Hackenschmidt, R. (Hrsg.): Tagungsband: 16. Bayreuther 3D-Konstrukteurstag. am 17. September 2014. Bayreuth: Lehrstuhl für Konstruktionslehre und CAD, Universität Bayreuth, 2014.

 


2013

 

M. Willert-Porada, P. Pontiller-Schymura, H.-S. Park, A. Rosin: Laser-Assisted Microwave Plasma Processing of Ceramic Coatings. Journal of Ceramic Science and Technology, vol. 4 (1), 1 - 10, DOI: 10.4416/JCST2013-00003, April 2013.

 

H.-S. Park, M. Willert-Porada, W. Krenkel: Rapid Pyrolysis of CFRP by Means of Microwaves for the Production of C/SiC Composites. Journal of Materials Science and Engineering A 3 (3), 145 - 152, March 2013.

 

M. Preißinger, S. Pöllinger, D. Brüggemann: Ionic liquid based absorption chillers for usage of low grade waste heat in industry. International Journal of Energy Research, doi:10.1002/er.2997, Article first published online, January 2013

 


2012

 

M. Preißinger, F. Heberle, D. Brüggemann: Supercritical Organic Rankine Cycle for Geothermal Application. In: Proceedings; M. Tierney, van der Pal, M. und Ian W. Eames (Hg.): Heat powered cycles 2012. ECN, Paper No. 280, pp. 25-26, Alkmaar (Netherlands), September 2012

 

K. Wu, H.-S. Park, M. Willert-Porada: Pyrolysis of polyurethane by microwave hybrid heating for the processing of NiCr foams. Journal of materials processing technology, vol. 212 (7), 1481 - 1487, DOI: 10.1016/j.jmatprotec.2012.02.010, July 2012.

 

M. Willert-Porada, T. Gerdes, A. Rosin: Microwave antenna for selective heating of glass melts. Microwave Symposium Digest (MTT), 2012 IEEE MTT-S, 1 – 3, DOI: 10.1109/MWSYM.2012.6259574, June 2012.

 

M. Preißinger, F. Heberle, D. Brüggemann: Der ORC-Prozess auf Biomassebasis - derzeitiger Einsatz und Optimierungsansätze. In: Tobias Zschunke (Hg.): Tagungsband. Beiträge zum Fachkolloquium "Elektroenergie aus Biomasse in dezentraler Anwendung - Technik, Ökonomie, Ökologie", 12.-13. Mai 2012, Hochschule Zittau/Görlitz (Wissenschaftliche Berichte / Hochschule Zittau/Görlitz, 110), S. 53-59, Mai 2012

 

F. Rieg, R. Hackenschmidt, P. Legat: Simulationsgestützte Beurteilung der Dauerfestigkeit einer Förderschnecke für die Pellet-Dosiereinrichtung eines Blockheizkraftwerkes. In: Berger, M. (Hrsg.): Saxsim - 4. Saxon Simulation Meeting and Mathcad Workshop. Präsentationen und Vorträge des 4. Anwendertreffens am 17. 04. 2012 an der TU Chemnitz. Chemnitz: Universitätsverlag Chemnitz, 2012.

 


2011

 

M. Willert-Porada, T. Gerdes, A. Schmidt: Microwave assisted Platinum recycling. Microwave symposium Digest, 2011 IEEE MTT-S, 1, doi: 10.1109/MWSYM.2011.5972843, June 2011.

 

C. Kern, P. Kaiser, R. Unde, C. von Olshausen, A. Jess: Considerations concerning the energy demand and mix for global welfare and stable ecosystems. Chem. Ing. Techn. (Sonderheft Energie) Vol. 83, pp. 1777 – 1791, 2011

 


2010

 

Z. Negahdari, M. Willert-Porada: Comparison of Microwave and Conventional Sintering of LHA Ceramics and Functionally Graded Alumina-LHA Ceramics. Advances in Science and Technology, vol. 63, 332 - 339, DOI: 10.4028/www.scientific.net/AST.63.332, October 2010.

 

T. Gerdes, H.-S. Park, A. Rosin, A. Schmidt, M. Willert-Porada: Microwave Antenna Array for High Temperature Material Processing. Microwave Symposium Digest (MTT), 2010 IEEE MTT-S International, 1424 – 1427, DOI: 10.1109/MWSYM.2010.5515857, May 2010.

 

L. E. Kallinikos, A. Jess, N. G. Papayannakos: Kinetic study and H2S effect on refractory DBTs desulphurization in a heavy gas oil. J. Cat. Vol. 269, pp. 169 – 178, 2010

 

A. Seeberger, A. Jess: Desulfurization of diesel oil by selective oxidation and extraction of sulfur compounds by ionic liquids - a contribution to a competitive process design. Green Chem. Vol. 12, pp. 602 -608, 2010

 

A. Jess: What might be the energy demand and energy mix to reconcile the world´s pursuit of welfare and happiness with the necessity to preserve the integrity of the biosphere? Energy Policy Vol. 38, pp. 4663 – 4678, 2010

 


2009

 

Z. Pajkic, M. Willert-Porada: Atmospheric pressure microwave plasma fluidized bed CVD of AlN coatings. Surface and Coatings Technology, vol. 203 (21-22), 3168  - 3172, DOI: 10.1016/j.surfcoat.2009.03.047, July 2009.

 

A. Jess, C. Kern: Energieverbrauch und Kosten der Herstellung von Mineralölprodukten in Deutschland. Erdöl Edgas Kohle Vol. 125, pp. 207 – 214, 2009

 

M. Matzke, U. Litzow, A. Jess, R. Caprotti, G. Balfour: Diesel Lubricity Requirements of Future Fuel Injection Equipment. SAE Int. J. Fuels Lubr. Vol. 2, pp. 273 – 286, 2009

 

H.-S. Park, F. Yang, M. Rabenstein, M. Willert-Porada: Pyrolyse mittels Mikrowellen zur Herstellung von C-SiC-Verbundkeramiken. In W. Krenkel (Hrsg.): Verbundwerkstoffe: 17. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany, S. 277-284, DOI: 10.1002/9783527627110.ch38, 2009.

 


2008

 

A. Seeberger, A. Jess: Tiefentschwefelung von Benzin mit Membranen aus Ionischen Flüssigkeiten. Chem. Ing. Techn. Vol. 80, Issue 9, p. 1319, 2008

 

J. Latz, R. Peters, J. Pasel, A. Jess: Hydrodesulfurization of jet fuel by pre-saturated one-liquid-flow technology for mobile fuel cell applications. Chem. Eng. Sci. Vol. 64, pp. 288 – 293, 2008

 


2007

T. Gerdes, M. Willert-Porada: Development of Functionally Graded SiC-Based Diesel Engine Exhaust Gas Filter. Technical Proceedings of the 2007 NSTI Nanotechnology Conference and Trade Show, Vol. 4, pp. 648-651. ISBN 1-4200-6349-9, 2007

 

Anschrift

Prof. Brüggemann
Prof.-Rüdiger-Bormann-
Straße 1
95447 Bayreuth

T. 0921 - 55-6801
F. 0921 - 55-6802